Loading...
Serving Abilene, TX and surrounding areas. (325) 283-1765
Serving Abilene, TX and surrounding areas. (325) 283-1765
Your pool deck takes a beating every summer. We resurface worn, cracked, and slippery concrete so your family can enjoy the pool area safely - without burning their feet.
Your pool deck takes a beating every summer. We resurface worn, cracked, and slippery concrete so your family can enjoy the pool area safely - without burning their feet.
Pool deck coatings and resurfacing in Abilene, TX means applying a fresh protective layer over your existing concrete so it looks new, grips wet feet safely, and holds up under the Texas sun - most jobs take one to three days and the pool is back open within five days.
If your deck has turned a washed-out gray, developed cracks that keep coming back, or feels slick near the steps after a swim, you are dealing with a surface that has broken down under Abilene's intense UV exposure and shifting clay soil. This is a pattern we see constantly in the established neighborhoods on the south and southwest sides of the city, where pool decks from the 1970s and 1980s are now well past their first resurfacing.
Resurfacing does not mean tearing out the slab - the old concrete stays in place, which keeps the project faster and far less expensive than starting from scratch. If you are also dealing with interior concrete that needs attention, our concrete sealing service is a natural companion to what we do outside at the pool.
If you or your kids have slipped near the pool edge, the texture has worn down. Concrete surfaces lose their grip over time, especially in high-traffic spots near steps and ladders. A new coating with a proper slip-resistant finish puts that safety back.
Small hairline cracks are common in Abilene because the clay soil underneath shifts with every rain and dry spell. If you can see cracks clearly from a standing position, they are wide enough to let water in, which makes them worse over time. Resurfacing with proper crack repair stops the cycle before you need to replace the slab.
Abilene's intense sun bleaches concrete coatings faster than most parts of the country. If your deck looks dull, blotchy, or noticeably different in color from one area to another, the protective layer has broken down and the concrete underneath is now exposed to UV and moisture.
That white buildup is mineral residue from Abilene's hard water splashing onto the deck and drying repeatedly. When it keeps returning no matter how often you scrub it, the surface has become porous enough to absorb and hold minerals. A fresh coating seals the surface and makes it much easier to keep clean.
We handle every phase of pool deck resurfacing - from surface cleaning and crack repair through final coating application. The most common choice for Abilene homeowners is a spray-on texture coating, sometimes called a cool deck or acrylic texture finish, which bonds directly to the existing concrete and can be tinted in a wide range of colors. For decks where homeowners want more of a decorative look, we also apply thicker overlays that can be stamped or colored to look like stone or tile. Every project begins with the same foundation: full surface prep, crack repair, and treatment of any mineral deposits or efflorescence so the new coating bonds correctly and lasts.
After the coating is down, we recommend pairing it with a UV-resistant sealer to protect the color and the surface from Abilene's sun. That sealer should be refreshed every two to three years - which is a small maintenance step compared to what you save by not resurfacing again early. If you are dealing with significant surface deterioration across the rest of your outdoor concrete, our concrete floor stripping and removal service can take care of concrete that is past the point of resurfacing, while our concrete sealing service protects surfaces that are still in good shape.
A thin, durable acrylic finish that grips wet feet and stays cooler underfoot than bare concrete - the best fit for most Abilene pool decks.
A thicker overlay that can be stamped and colored to mimic stone or tile - suited for homeowners who want a high-end look without replacing the slab.
Every project starts with cleaning, crack filling, and mineral deposit removal - the prep work that determines whether a new coating lasts or fails.
A topcoat sealer applied after the base coating to protect color and extend the life of the surface - especially important given Abilene's UV intensity.
Two things make pool deck work in Abilene different from most other Texas cities: the clay soil and the heat. Abilene sits on shrink-swell clay that expands when it gets wet and contracts when it dries out. That constant movement is why pool decks here develop cracks much faster than in areas with more stable ground. When we resurface a deck in Abilene, addressing those cracks is not just cosmetic prep - it is the step that determines whether the new coating lasts five years or fifteen. We see this most often in the established neighborhoods on the south and southwest sides of the city, where backyard pools from the 1970s and 1980s are now showing all the typical signs of wear. Homeowners in communities like Potosi and Buffalo Gap often call us for this exact situation.
Then there is the sun. Abilene consistently records some of the highest UV index readings in Texas, and coatings that are not formulated for that level of exposure fade and chalk within a few years. When we talk with homeowners about product selection, the UV resistance of the coating is always part of the conversation - not an afterthought. The right product paired with a good sealer is what keeps a Abilene pool deck looking finished and holding up, summer after summer. For authoritative guidance on concrete coatings and standards, the American Concrete Institute is the leading professional body covering how concrete behaves in different climates and soil conditions.
We will ask a few quick questions about your deck and schedule a free on-site visit, usually within a business day. No commitment, no pressure.
We walk the deck, look at the condition of the concrete, check for cracks and mineral buildup, and show you color and texture samples. You receive a written estimate that breaks out prep work, materials, and labor so you know exactly what you are paying for.
The crew pressure washes the deck, treats any mineral deposits, and fills every crack and chip. In Abilene, this step often takes longer than homeowners expect because of the clay soil cracking - but it is the step that makes the coating last.
Once the surface is clean, dry, and repaired, the coating goes on in sections. Stay off the deck for 24 to 48 hours while it cures, then we walk it with you before we leave and tell you when it is safe to open the pool - typically three to five days total.
Spring booking slots in Abilene fill up fast. Send us a message or call now - we will get back to you within one business day with a clear answer and a free written estimate.
(325) 283-1765We give you a written quote that covers prep, crack repair, materials, and labor before anyone picks up a tool. There are no surprises on the final invoice - because you approved the full scope before we started.
Abilene's shrink-swell soil is the main reason pool decks crack faster here than almost anywhere else in Texas. We treat crack repair as a structural step, not a cosmetic one - because a coating applied over active cracks will not last through two wet seasons.
We only use coatings and sealers formulated for high-UV, high-heat climates. Abilene's sun will degrade a standard coating years before a purpose-built product shows any wear. The Concrete Network details how climate affects coating longevity.
When you call or send a message, you hear back within one business day - not a week later after the spring booking window has closed. We are a local Abilene business and we operate like one.
Put those four things together - honest pricing, soil-aware crack repair, climate-matched products, and fast communication - and you have a resurfacing job that looks good and holds up through Abilene's toughest summers. That is what we aim to deliver on every project.
When a deck or slab is past the point of resurfacing, we remove the old concrete cleanly and leave the ground ready for whatever comes next.
Learn MoreProtect patio slabs, driveways, and other outdoor concrete surfaces with a penetrating sealer that guards against Abilene's UV and mineral-rich water.
Learn MoreSpring is the best time for resurfacing in Abilene - moderate temperatures mean better curing and better results. Call now or send a message and we will get your estimate scheduled within one business day.