Loading...
Serving Abilene, TX and surrounding areas. (325) 283-1765
Serving Abilene, TX and surrounding areas. (325) 283-1765
Plain concrete holds your stuff up. A metallic epoxy floor makes your garage or interior space look like it belongs in a showroom - and it holds up through Abilene summers without peeling.
Metallic epoxy flooring in Abilene is a thick, poured coating applied directly over your existing concrete slab, containing fine metallic pigments that swirl and shift as the material levels out to create a glossy, one-of-a-kind finish. Most residential jobs take two to three days from surface prep through final cure.
A lot of Abilene homeowners come to us after years of fighting bare concrete - the dusty gray powder that shows up after every sweep, the oil stains that will not budge, the cracked edges that keep getting worse. Metallic epoxy seals all of that away and replaces it with a surface that is genuinely easy to keep clean. If your garage is becoming a workshop or hobby space, this is one of the most impactful upgrades you can make.
Not sure whether metallic epoxy or a standard coating is the right fit? Our epoxy floor coatings page covers the full range of options so you can compare before you call.
If you can see cracks running across your slab - even thin ones - that is a sign the concrete has been through stress, likely from Abilene's soil movement or temperature cycles. Small cracks can be filled and stabilized before the coating goes down. Left alone, they only get wider, and a cracked bare floor is harder to clean and easier to damage further.
If your garage floor has dark, soaked-in stains from vehicle leaks that no amount of scrubbing removes, a metallic epoxy coating can cover and seal the surface permanently. The prep process removes the contaminated top layer of concrete before the new coating goes on. After installation, spills sit on top of the sealed surface and wipe up in seconds.
Bare concrete naturally sheds a fine powder called efflorescence - a mineral residue that works its way up through the slab, especially in areas with hard water like Abilene. If a white, chalky film keeps reappearing after cleaning, the concrete needs to be sealed. A metallic epoxy coating stops that process entirely.
If you are converting a garage into a workshop, gym, or hobby space, a bare concrete floor undercuts the whole project. Metallic epoxy transforms the floor into a finished surface that is easy to clean, comfortable to stand on, and genuinely attractive. Many Abilene homeowners make this upgrade when they are already investing in shelving, lighting, or insulation.
The most popular choice for residential projects is a full-floor metallic epoxy system with a clear protective topcoat - this is what gives you the deep, glossy finish with the swirling three-dimensional effect. For spaces that get extremely heavy use, we also install systems with added broadcast aggregate in the topcoat for a non-slip surface that does not sacrifice the look. If your floor takes a serious beating from vehicle traffic or shop equipment, pairing the metallic base with a polyaspartic topcoat gives you extra hardness and chemical resistance. See our urethane cement flooring page if you need a coating engineered specifically for commercial-grade abuse.
We also handle spaces beyond garages. Interior floors in laundry rooms, basements, salons, and showrooms are great candidates for metallic epoxy when the homeowner wants something that looks intentional rather than industrial. Every project starts with a thorough slab assessment so we can tell you honestly which system makes sense for your specific floor.
Best for homeowners who want a high-gloss showroom look that holds up to vehicle traffic and West Texas temperature swings.
Ideal for laundry rooms, workshops, and basement floors where a clean, sealed surface makes the space more functional and attractive.
A strong fit for business owners who want a floor that reflects their brand and stands up to daily foot traffic without constant upkeep.
Suited to mechanics, woodworkers, and hobbyists who need a metallic finish with added grip and resistance to dropped tools and chemical spills.
Abilene sits in a semi-arid climate where summer highs regularly exceed 100 degrees and winter nights can dip below freezing - sometimes in the same week during shoulder seasons. That kind of temperature range causes concrete to expand and contract repeatedly, which is exactly the condition that causes poorly installed coatings to bubble and peel. The clay-heavy soils common across Taylor County also shift as they absorb and release moisture, putting stress on slabs from below. An experienced local contractor accounts for both of those factors before a single drop of coating goes down. We see what happens when that step gets skipped, and it is not a small problem to fix.
A significant portion of Abilene's residential neighborhoods were built in the 1950s through the 1980s, and many of those garage floors have decades of oil drips, old paint, and previous sealers on them. Those layers have to come off completely before a metallic epoxy coating will bond properly. We serve homeowners across the area, including Hamlin and Anson, where older housing stock and West Texas soil conditions are just as common as they are here in Abilene.
We will ask a few quick questions about your space and the current condition of the floor. Most Abilene projects get a free on-site visit scheduled within one business day, because the slab condition makes a real difference in the final price and we want to give you an accurate number.
We inspect your concrete in person - checking for cracks, testing for moisture, and evaluating how much prep work is needed. Abilene's clay soil and temperature history mean older slabs often need some repair before coating. You get a written estimate that covers everything before any work starts.
You clear the floor completely - vehicles, shelving, stored items - and we handle the rest. Day one is grinding and surface preparation, the most important step in the whole job. Day two is the metallic coating application, where the swirling finish is created. In Abilene's dry air, we time the application to avoid the coating setting up too fast.
After the metallic layer cures, a clear protective topcoat goes on for long-term durability. The floor is ready for foot traffic within 24 hours and vehicles after 72 hours. Before we leave, we walk you through care instructions and tell you exactly what to watch for in the first few weeks.
Free estimate. Written quote before any work starts. We reply within one business day.
(325) 283-1765We test your slab for moisture before any coating goes down - a step many contractors skip. Abilene's clay soil and unpredictable rain can leave a slab wetter than it looks, and coating over a damp slab is the most common reason metallic epoxy floors fail within the first year.
Every job starts with proper mechanical diamond grinding to open the concrete surface. This is what makes the coating bond for years instead of peeling in months. We do not clean and coat - we prepare properly and then coat, because that distinction is the whole difference in longevity.
We work in the same Abilene climate our customers live in, so we schedule application days with wind forecasts in mind, adjust mixing for the dry air, and know what Abilene's soil and temperature cycles do to a slab over time. That local knowledge shapes every decision on a job.
You get a written quote covering prep, materials, and labor before any work begins. If we find something unexpected during the slab assessment, we tell you before we start, not after. The American Society of Concrete Contractors sets the professional standards we work from.
Every one of those proof points adds up to the same thing: a floor that is still looking good years from now, not a call-back job six months after we left. That is what we are here to deliver.
A heavy-duty poured coating engineered for Abilene's temperature extremes - the right choice when a floor needs to flex with the slab rather than crack along with it.
Learn MoreThe solid-color and chip-flake systems that protect concrete floors in garages and commercial spaces across Abilene with a proven, durable finish.
Learn MoreSummer booking slots fill fast - reach out today and we will get your project on the calendar before the heat peaks.